Alex – P20 Profile
Alex – P33 Profile
Alex – P40 Profile
Alex – W20 Profile
Application
- Trapezoidal metal panel with a corrugation height up to 20 mm.
- Suitable for almost all applications due to its static properties, it can be used both for internal roof & wall covering.
Application
- Trapezoidal metal panel with a corrugation height up to 33 mm.
- Suitable for almost all applications due to its static properties, it can be used both for wall and roof covering. Economic section when needed such application.
Application
- Trapezoidal metal panel with a corrugation height up to 40 mm.
- Suitable for almost all applications due to its static properties, it can be used both for wall and roof covering. The solution for high performance cladding system.
Application
- Sinusoidal profiled metal sheet with 20 mm high corrugation waves, this product can be used in wall covering, water tanks and grain silos.
- Recently applied as external façade with better appearance than normal corrugated sheets.
Corrugated steel sheets are made using a cold-form process, where sheets of metal are pressed flat and then run through a process called roll forming. During the roll forming process, the sheets are pressed using rolling dies that create the desired corrugations, the shapes of which are modified by changing the rolling dies. The finished corrugated sheets are then sheared off at a particular length.
Corrugated metal sheets are used for different building purposes. We offer a variety of specifications which in turn offer versatility in terms of usage.
Other than roofing, galvanized corrugated sheets are also used for cladding purposes. Depending on your requirement, we will offer the best suitable corrugated steel sheet for maximum benefits